I ‘only’ have 12Tb drives and yet my zfs-pool already needs ~two weeks to scrub it all. With something like this it would literally not be done before the next scheduled scrub.
There is an enterprise storage shelf (aka a bunch of drives that hooks up to a server) made by Dell which is 1.2 PB (yes petabytes). So there is a use, but it’s not for consumers.
That’s a use-case for a fuckton of total capacity, but not necessarily a fuckton of per-drive capacity. I think what the grandparent comment is really trying to say is that the capacity has so vastly outstripped mechanical-disk data transfer speed that it’s hard to actually make use of it all.
For example, let’s say you have these running in a RAID 5 array, and one of the drives fails and you have to swap it out. At 190MB/s max sustained transfer rate (figure for a 28TB Seagate Exos; I assume this new one is similar), you’re talking about over two days just to copy over the parity information and get the array out of degraded mode! At some point these big drives stop being suitable for that use-case just because the vulnerability window is so large that the risk of a second drive failure causing data loss is too great.
I have 2*12TB whitelabel WD drives (harvested from external drives but Datacenter drives accourding to the SN) and one 16 TB Toshiba white-label (purchased directly also meant for datacenters) in a raidz1.
How full is your pool? I have about 2/3rds full which impacts scrubbing I think.
I also frequently access the pool which delays scrubbing.
What is the usecase for drives that large?
I ‘only’ have 12Tb drives and yet my zfs-pool already needs ~two weeks to scrub it all. With something like this it would literally not be done before the next scheduled scrub.
Data centers???
Jesus, my pool takes a little over a day, but I’ve only got around 100 tb how big is your pool?
The pool is about 20 usable TB.
Something is very wrong if it’s taking 2 weeks to scrub that.
Sounds like something is wrong with your setup. I have 20TB drives (x8, raid 6, 70+TB in use) … scrubbing takes less than 3 days.
High capacity storage pools for enterprises.
Space is at a premium. Saving space should/could equal to better pricing/availability.
There is an enterprise storage shelf (aka a bunch of drives that hooks up to a server) made by Dell which is 1.2 PB (yes petabytes). So there is a use, but it’s not for consumers.
That’s a use-case for a fuckton of total capacity, but not necessarily a fuckton of per-drive capacity. I think what the grandparent comment is really trying to say is that the capacity has so vastly outstripped mechanical-disk data transfer speed that it’s hard to actually make use of it all.
For example, let’s say you have these running in a RAID 5 array, and one of the drives fails and you have to swap it out. At 190MB/s max sustained transfer rate (figure for a 28TB Seagate Exos; I assume this new one is similar), you’re talking about over two days just to copy over the parity information and get the array out of degraded mode! At some point these big drives stop being suitable for that use-case just because the vulnerability window is so large that the risk of a second drive failure causing data loss is too great.
Thats exactly what I wanted to say, yes :D.
It’s to play Ark: Survival Evolved.
there was a time i asked this question about 500 megabytes
I am not questioning the need for more storage but the need dor more storage without increased speeds.
I too, am old.
I’m older than that but didn’t want to self report. the first hard disk i remember my father buying was 40mb.
What’s scrubbing for?
A ZFS Scrub validates all the data in a pool and corrects any errors.
I worked on a terrain render of the entire planet. We were filling three 2 Tb drives a day for a month. So this would have been handy.
What drives do you have exactly? I have 7x6TB WD Red Pro drives and I can do a scrub less than 24 hours.
I have 2*12TB whitelabel WD drives (harvested from external drives but Datacenter drives accourding to the SN) and one 16 TB Toshiba white-label (purchased directly also meant for datacenters) in a raidz1.
How full is your pool? I have about 2/3rds full which impacts scrubbing I think. I also frequently access the pool which delays scrubbing.
It’s like 90% full, scrubbing my pool is always super fast.
Two weeks to scrub the pool sounds like something is wrong tbh.