- 0 Posts
- 38 Comments
63·1 month agoJellyfin needs to partner with someone people can pay a very low and reasonable and/or one-time fee to enable remote streaming without the fuss of setting up either dangerous port-forwarding or the complexity of reverse proxies (paying for a domain-name, the set-up itself including certificates, keeping it updated for security purposes).
And no a VPN is not a solution, the difficulty for non-technical users in setting up a VPN (if it’s even possible, on smart-tvs it’s almost always not, and I don’t think devices like AppleTV and other streaming boxes often support them) is too high and it’s an unwanted annoyance even for technical users.
I’m not talking about streaming video’s through someone else’s servers or using their bandwidth. I’m talking about the connection phase of clients and servers where Plex acts like an enhanced dynamic DNS service with authentication. They have an agent on the local media server which sends to the remote web service of the third party the IP address, the port configured for use, the account or server name, etc. When a client tries to connect they go to this remote web service with the servername/username info, the web service authenticates them then gives them the current IP address and any other information necessary. It then sends some data to the local Jellyfin server about the connecting client to enable that connection and then the local media Jellyfin server and the client talk directly and stream directly.
Importantly the cost of running this authentication and IP address tracking scheme would be minimal per Jellyfin server. You could charge $5/year for up to 20 unique remote clients and come out ahead with a slight profit which could be put back into Jellyfin development and things like their own hosting costs for code, etc. Even better if they offer lifetime for this at $60-$80 they’d get a decent chunk of cash up-front to use for development (with reasonable use restrictions per account so someone hosting stuff in Hetzner or whatever and serving 300 people with 400 devices will need to pay more because they’re clearly doing this for profit and can afford to throw some more money at Jellyfin).
Until Jellyfin offers something that JUST WORKS like that it’s not going to be a replacement for Plex, whatever other improvements they offer to users it’s still a burden for the server runner to set up remote streaming in a way that isn’t either incredibly dangerous (port forwarding) OR either involves paying money to third parties AND/OR the trouble of running your own reverse proxy and/or involves walking users through complicated set-up process for each device that you have to repeat if you change anything major like your domain name when using a VPN.
5·1 month agoThey previously sold out email addresses to an anti-piracy law firm which proceeded to extort penalty settlements from the holders of the accounts. This is why their upload bots were banned on leet x.
1·2 months agoDe-telecine: default De-interlace detection: default De-interlace: decomb
Video encoding: x265 10bit (don’t use NVENC, Intel, or AMD hardware encode)
Preset: slow
Quality rate factor: 16
The above should be suitable for most DVDs and yields good results of 1/4 to 1/2 the size going from MPEG2 to HEVC.
Are you planning on re-encoding anyways? For DVDs Handbrake can read and re-encode them directly so there’s no need for an intermediate.
If you’re not planning on re-encoding or we’re talking BluRays then makemkv is the most used and allows creating disc images, file extraction to drive, or file extraction to drive in MKV container.
Of course. The YT-DLP team by refusing to support DRM videos gave Google a huge neon sign that said this is the one thing that will shut them down, the line they won’t cross. Google has targeted the big front end instances with rate limits and blocks and this is the next step.
Our only hope really is that the current YT-DLP team hands the reins over to people in countries that don’t give a shit about copyright and they put back in the ability to download and decrypt DRM protected video.
This is most likely cached images. For example emojis from your instance or other instances you’ve viewed as well as maybe other images but definitely emojis. Possibly other things like the images in post thumbnails which helps reduce costs by ensuring your instance doesn’t have to re-send you the same images over and over again each time you close the browser.
Lemmy doesn’t generate enough content yet daily that most people who check in twice a day and scroll a bit through pages won’t almost certainly encounter several posts with images they’ve already seen before. I’ve had many cases where just a bit of scrolling brings up 3-4 day old posts I’ve seen before so caching associated images could save in cases like those at least 3-4 transfers of those images per user which adds up for a non-profit no ads service like lemmy.
can they be added to the search function in qbittorrent?
Nearly all can. All the one’s you’d want anyways work with Jackett. They don’t work via direct plugins but just run Jackett, follow its instructions and connect it to qBittorrent and you’re good to go searching just the same as before. Some annoying ones occasionally require setting up another software like Flaresolver but for the most part the big easy to get into ones that open their doors annually work without that.
While there will likely be some openings throughout the year the fact is most trackers open in the period from Thanksgiving/late November through early January. TL opens then basically every year, a number of more exclusive trackers do open signups then, some for only 24 hours so get an RSS feed of that and remember to sign up IMMEDIATELY as soon as you see a post as the post on reddit may have been made 22 hours into a 24 hour open window, you just don’t know. TL though at least tends to stay open for several days. So if you have no luck before then, wait until that time of the year and then check daily or even twice daily if you can, once before bed, once earlier when you get up or lunch or after work, whatever.
If by mainstream channels you mean major streaming services then there is no perfectly private option. But I would recommend an AppleTV as the closest thing (it also doesn’t have ads which I really appreciate).
Other than that your options are devices that can’t access major streaming services at greater than 720p and are hackily put together on multiple levels but are fine for streaming local media you host yourself or more expensive than ATV devices and modding them with alternative launchers.
What they told you is misleading.
Transcoding and burning in subtitles for Plex and similar only happens in some cases if your streaming device doesn’t support image based subtitles. Plex themselves could fix this on a lot more devices but don’t.
10 years ago it was the case that there were a LOT of issues with anything but text subtitles. These days it depends. If you’re running it directly off a smart tv (bad experience anyways, not recommended) it’s likely to be an issue. If you’re using an Android streaming device or Apple TV or gaming console there’s a good chance the subs just work.
Truth is lots of things can force transcoding with Plex including using certain audio formats in certain media containers. Most of these days picture subs work. If you can get text subs it’s not a bad thing but I wouldn’t go through the hassle of doing flawed OCR unless you can confirm it’s an issue you’re experiencing with your setup.
Console batch file for mkv merge should do that as long as subs are named same as video files (or something consistent like that name +subs).
You’d want to target the sub files not idx. If that fails I’d just do an intermediate step of merging the sub and idx files into an mks file then merging that into the mkv. The gui only needs the sub files added. I’ll try and come back to this though someone else already posted a script that should be able to be adapted to do this.
They’re US vassals. They don’t care about soft power just enriching themselves as much as possible while avoiding drawing US ire and being taken out back to be killed for competing too successfully. (See plaza accords when Japan did this)
In other words their power doesn’t come from a positive view by westerners but by loyalty to Washington’s geopolitical interests. They’re never going to change anything because they can’t overcome US-centric media and its power.
No amount of cultural popularity will help them if they’re turned into a villain for being a threat to the US’s interests. Similarly it’s not necessary for them to have good PR for soft power in the first place because of their subservient position. Their interests are tied to that of the US so displacing the culture power of the US with their own at no profit doesn’t benefit them and no individual corporation or capitalist is going to forgo profits for some vague hope of their country having more leverage as a vassal in 20 years.
Japan is viewed favorably because the US forced them to commit economic suicide in the 90s and the hate campaign let up. We are 35 years out from massive racism and fearmongering about Japan pushed by the media which relented and created this space only after they were brought to heel. Look how many Asian food places in the west still say “no MSG”. That was driven by western media reporting, racism, and fearmongering and clearly is still stronger than any anime fan feelings of positivity towards a normal ingredient.
Also wasn’t that guy their puppet dictator first leader who presided over numerous atrocities with a regime full of Japanese collaborators?
Just be thoughtful. Accessibility is not seen as an excuse for breaking copyright. Take precautions.
Also if you’ve never done audio editing I’ll mention audacity the editor has a tool called “auto duck” that’s perfect for lowering the volume of other tracks in a mix when your select track with your voiceover makes noise To enhance clarity of it.
Full disc rips perhaps. Unfortunately many remux don’t bother to pass through such tracks (though some do). Some groups like qxr often but not always may include them when available. Thing is they only really exist for movies released in the past perhaps 15 years from what I’ve seen.
For NAS getting something used from someone upgrading to something bigger on eBay is often a good route. Just be absolutely sure the model being sold meets your needs. Do you plan to run software on it for instance? Check what it can comfortably run first.
For drives. Server part deals always has good prices. I’d recommend only buying the ones with 1-3 year seller or manufacturer warranty though which is most of them. Easily half the price per TB you find most places. $150 gets you 14TB there.
Never been implemented. It doesn’t exist.
Cables support it but zero devices made it to the consumer market and both devices would need to support it for it to work. It’s a dead standard from another era at this point. WiFi speeds have become so significant that there’s just no reason for the additional costs that would be involved.
I admit if half of the people out there who bought smart TVs started refusing to connect them to the internet and bought streaming boxes instead there might be an incentive for TV makers to try it but no incentive for streaming devices to help them do it and at that point it’s just easier for TV makers to require an internet connection or the TV doesn’t work.
The reason they were banned on leetx is because they sold out their user email lists to an anti-piracy law firm which tried to extort money from people. I wouldn’t trust people like that. I especially would be wary of subjecting users to people like that. Torrent freak has coverage if you care to search.
Not really. This requires a sophisticated attacker. I’d suggest updating soon but I doubt most people are at risk. As always verify downloads before running them and check where you should be getting updates and if you’re sent to a sketchy file host try to find updates from the official website instead.
The biggest risk is MTM interception and replacement of the python executable if you try and use the search tool for the first time. I suppose avoid doing that until you update the client from their website.
Drag the main BDMV folder that has stream and playlist subfolders into handbrake. It will read the playlist files and show you possible combinations that you can choose to encode from. It will also grab chapter and subtitles.
At least it should. Though makemkv as others note can do this itself.
Interesting project. Thanks for the link and I do appreciate it and could see some very good uses for that but it’s not quite what I meant.
Unfortunately as it notes it works as a companion for reverse proxies so it doesn’t solve the big hurdle there which is handling secure and working flow (specifically ingress) of Jellyfin traffic into a network as a turn-key solution. All this does is change the authorization mechanism but my users don’t have an issue with writing down passwords and emails. Still leaves the burden of:
Which is a hassle and a half for technically proficient users and the point that most other people would give up.
By contrast with Plex how many steps are there?
By contrast this still requires the hoster set up a reverse proxy (major hassle if done securely with certificates as well as an expense for a domain which works out to probably $5 a year), to then have their users point their jellyfin at a domain-name (possibly a hard to remember one as majesticstuffbox[.]xyz is a lot cheaper than the dot com/org/net equivalents or a shorter domain that’s more to the point), auth and so on. It’s many, many, many more steps and software and configurations and chances for the hosting party to mess something up.
My point was I and many others would rather take the $5 we’d spend a year on a domain name and pay it for this kind of turn-key solution for ourselves and our users even if provided by a third party but that were Jellyfin to integrate this as an option it could provide some revenue for them and get the kinds of people who don’t want to mess with reverse proxies and certificates into their ecosystem and off Plex.